1-The workstation consists of solid panels of 1.5 m height and is open from the front side with a space for visitor’s chairs and tea table in front. The total thickness of the workstations panels is 6.3 cm
2- Top glass panels can be added as per the customer’s request.
3- The Alum thickness varies from 1.2 to 3.2 mm depending on the part.
4-The aluminum is powder coated with RAL 7044
5-The panels are covered with modified Upholstery Fabric where it provides diversification of the sound signals (where it makes perfect for the call centers and open areas). In addition, the fabric is installed on a thin layer of sponge for sound absorption.
6-The table top is from particle boards / MDF 25mm are machine laminated from both sides with anti-scratch melamine, and the edges are covered with2 mm P.V.C and installed through edge lamination machines. Holes for cables with plastic cover are drilled.
7- The supporting items are powder coated steel with 1.2 mm
8-It has a fairly large space table to accommodate more than one PC and many open files and documents at the same time.
9- The bottom part has a track for electrical wiring/however the track location could be manufactured to be in the top part above the table. With already punched location for the electrical/network sockets.
10- It comes with either one or two units of pedestals as per request. Each pedestal has 3 drawers.
11- It has an open steel shelf.
12-The front side is supported with a lower panel to support the table.
13-The unit is totally a knockdown system and it can easily be dismantled and re-located and re-installed.
14-All you need to install/dismantle is a normal drill.
15-It takes 15 minutes in installation, and does not need any skills.
16- The factory has the capacity to produce any panel/ any accessory to accommodate any change in the workstation design to accommodate any future changes in the layout.
17- The products are guaranteed life time against manufacturing defects.